we are trying to form N+1 redundancy
50 remote sites and one DC
remotes site has 5520 and DC has 5520
1) when remote site wlc failed , so AP needs to communicate to DC and make the connectivity .
also do i need ...
I have purchased a Cisco LAP 1142 but the Access Point is not up to date and the IOS version has some security vulnerabilities. Unfortunately, my access point has reached its end-of-support date at the end of september but it is for 20 ...
I am not able add the route towards management port
we have two port
1) service port
2) management port
Our communication via management port , but i could not add the route towards that port , the error as below
The error a...
I have cisco 5508 wlc with the ios 220.127.116.11 version ios.
Currently the wlc is having 50 permanent base-ap-count license.
Due to the addition of new access point, have procured 50 adder license.
After installing the l...
We have a setup with a Wism-2 HA pair at the data center serving our internal ap's running 18.104.22.168. We have a couple remote users with 602's. They are rarely used so the problem may have started previously but gone unnoticed.
I think this problem...