With the latest security software and the ability to set up in minutes, it's no surprise Meraki Go access points were Cisco's number one seller on Amazon this week.
Hello Experts, Having the prompt name of standby WLC changing in accordance with the prompt name of active WLC by suffixing it with "-standby" is understood.However should not the "sysname" of the standby WLC retained even after HA sync up completes?
I have an WLC 1815i and 21 AP 1815i All APs joined controller well but all Clients connected to SSIDs on this controller have more packet lossplease help me to solve this problem.this configuration from management interface for controller: (Cisc...
view more
Hello Team. We are trying to implement an idea of daisy chaining WL+IP Camera.The idea is to power up a IW3702 by power supply, and connect an IP Camera to PoE out port, the problem is that camera should be in another vlan. For example AP in vlan 333...
view more
Hello Experts, The document is quite comprehensive and cautions against the achieve-ability of VLAN and IP address changes on via CoA via CWA through ISE stating the valid reason that, "ISE has no control over the endpoints when it is connected to an...
view more
I have a 1832i running ME version 8.5.131. I also have two 3702i APs that are joined and broadcasting the SSID. I have two issues. The LEDs on the 3702i are cycling through Red, Green, Off. I know that Green, Red, Off means that the...
view more
