While working on wireless LAN controller, sometimes we noticed something strange. The WLAN summary display on wireless LAN controller showed no clients associated to this WLC .
So in order to check further if we open the client page and we can find approximate 90 clients on WLC.
Now it was important to verify this buggy behavior so when we look at another controller, the WLAN Summary Display showed more than 31600 clients. Indeed that was also not the actual numbers. Their is a reported bug for this issue:-
CSCth52309 - Number of clients associated per wlan is displayed wrong
Since this is an internal Bug and visible to employees only, some of the details are:
Known Fixed Releases:
I researched further to gather more information and found one discussion within development team regarding this unexpected behavior happened :-
DetailNumber of clients associated per wlan is displayed wrong in the WCS->Monitor->Controller->WLAN.ConditionIf we have sequence of WLAN, i.e 1, 2,3 & 4 and if we associate a client to '4' it is displayed correctly.If we miss any WLAN in between it is not displaying correctly.
So have anyone tried to License a CMX Virtual Appliance through a EA Agreement ?And what did they do to get the license ? The trouble is that it (The EA page) asks for a UDI of the CMX appliance. But all Virtual Appliances have the same UDI: MSE Virt...
Hello, I have an AP Aironet 1832i with Mobility Express 8.8 installed, and I can't seem to find the following:- Session Timeout (https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-8/config-guide/b_cg88/wlan_timeouts.html). It mentions ...
I found some trouble about Wifi internet cannot print out data but LAN can print.I use access point for CISCO WAP-150 and just update version of firmware to 184.108.40.206 on middle last week. but just found trouble on Monday. and for CORE SWITCH i use CISCO SG-...
I’m working on a migration from 5508 to a 9800 WLC, and I notice that the local mac filter command “username xxxx:xxxx:xxxx mac ” does not have an option to add a description. Does anyone knows if there is a way to add a description to a user MAC address ...