Viten Patel is working as Technical Marketing Engineer (Converged Access) at Cisco. He was working as Wireless Escalation Engineer - Cisco TAC and holds many wireless certification like CCIE Wireless, CCNP Wireless, CCNA Wireless, CWNA, CWSP, CWAP, CWNE#146.
This is a video techtorial walking through the Prime Infrastructure WorkFlow for Converged Access. There are 3 WorkFlows (Small network, Large network and Centralized network deployment). This video shows the single switch Small Branch flow.
Below is a reference topology and deployment scenario
The WorkFlow helps deploy the above mentioned features. With just a few clicks you can deploy multiple branch networks with all the wired / wireless best practices for Converged Access.
What is achieved?
Some of the benefits of using the WorkFlow includes --
Simple to use
Masks the configuration complexity
covers most of the deployment scenarios
configure ones, use many times model
intelligence and best practices inbuilt in the tool
Hi, I have a vWLC in a remote lab where im using the interface G1 for WLC admin and also as wireless management interface. Then, at my home I have an AP 3702 in a network that can reach the WLC via VPN. The AP can ping the WLC and the WLC can pi...
I have three AERONET Aeronet AIR 1832I-E-K9 Wireless AP connected to Catalyst 9200 Switch I dont have any wieless controller. I need to configure them I have assigned them IP using "Capwap ap ip netmask"How can I make them work as an AP and I w...
Using 2x 1562's in this exact setup for bridging. I get to the part for whitelisting the MAC address (done), and enabling bridging (done) but the MAP never joins the RAP, with this error in the CLI: CRIT-MeshAwppAdj: Blacklisting Adjacency due to ...