Happy to Introduce “Wireless Config Analyzer Express” the next gen cloud based evolution of the WLC Config Analyzer (WLCCA) with powerful checks for Wireless LAN Controllers , Access Points (AP), Radio Frequency (RF), Mobility, Security, Mesh and Flex Configurations. “WCAE” provides state of art RF summary including stats summarization at WLC, AP group, Flex group level and RF health analysis at WLC, AP group, Flex group level.
Get the experience of hundreds of cases applied to your network in seconds
AP Data Summarization
Get list of AP HW types and operational modes in use
Quick data summarization for main RF stats, see what is happening at WLC, or AP group/Flex group levels
Simplified RF analysis tool, translate those RF statistics into simple Health report
Log File Summarization
List all messages in a short list, get counts and initial/end time
WLC running AireOS
File Types Supported
Sh run-config -> recommended option, gives you more bang for the buck
WCAE is a public facing tool and anyone with a valid CEC ID can enjoy its benefits. Please feel free to share this tool with your customers and partners. Note: Ensure that pop-up block is disabled for the page on your browser to run the script. Here are some cool screenshots from WCAE:
When connecting to the wireless network I have noticed that the clients will often skip an AP 10 feet away and connect to one two floors up and 100+ feet away. That doesn't sound very efficient and data rates are pretty poor.Can this be fixed?My test clie...
I recently installed vWLC release 8.5 in Hyper-V and referenced the hyper-v deployment guide. Once installed and configured, I could ping the management interface IP from the hyper-v host but couldn't load the web GUI from a browser on the host. After a l...
Hi, We have a remote site with FlexConnect and mainly Win7 devices. Last week we came across IP-adress conflicts for that scope. The Clients use the same Subnet for both NICs and they are active at the same time. As I could not find reliable inf...
WLC C9800-40-K9 on 16.12.1 We are seeing a lot of alarms in ISE for "12929 NAS sends RADIUS accounting update messages too frequently". The NAS is a 9800 WLC and the clients are mainly phones on our eduroam SSID. On the old 5508 controller there is n...
Hello Cisco members, I would like to ask if obtaining RSSI data from WLC controllers is possible, for associated and/or unassociated clients? I read some resources on the Internet which says it's doable via "Cisco Wireless Location Appliance", b...