Happy to Introduce “Wireless Config Analyzer Express” the next gen cloud based evolution of the WLC Config Analyzer (WLCCA) with powerful checks for Wireless LAN Controllers , Access Points (AP), Radio Frequency (RF), Mobility, Security, Mesh and Flex Configurations. “WCAE” provides state of art RF summary including stats summarization at WLC, AP group, Flex group level and RF health analysis at WLC, AP group, Flex group level.
Get the experience of hundreds of cases applied to your network in seconds
AP Data Summarization
Get list of AP HW types and operational modes in use
Quick data summarization for main RF stats, see what is happening at WLC, or AP group/Flex group levels
Simplified RF analysis tool, translate those RF statistics into simple Health report
Log File Summarization
List all messages in a short list, get counts and initial/end time
WLC running AireOS
File Types Supported
Sh run-config -> recommended option, gives you more bang for the buck
WCAE is a public facing tool and anyone with a valid CEC ID can enjoy its benefits. Please feel free to share this tool with your customers and partners. Note: Ensure that pop-up block is disabled for the page on your browser to run the script. Here are some cool screenshots from WCAE:
I'm with a problem between Xiaomi and external captive portal (+ external RADIUS), the wlc isn't processing back the requisition. My virtual interface address is 184.108.40.206 (for avoid troubles with cloudfare for example), and in callback moment that the...
Hello!We are just implementing a radiating cable to our cisco AIR-AP2802E-E-K9.We would like to set the antenna A to 2,4 GHz and antenna B to 5 GHz.On my WLC it is not possible, because only combinations of A or A+B or A+B+C or A+B+C+D are possi...
Hi Having an issue with the 9800 controller setup in sso, where I cant get clients to get a dhcp reply. The aps are up.. the ssid are up.. but external dhcp not so much I have tried setting it up globally under policy without effect. I hav...
Rogue auto-containment may have legal consequences, so it should be clear whether or not you are enabling it.I think Mobility Express is not clear about auto-containment. I just found the "Rogue Policies" option in the Best Practices menu. This option set...