Happy to Introduce “Wireless Config Analyzer Express” the next gen cloud based evolution of the WLC Config Analyzer (WLCCA) with powerful checks for Wireless LAN Controllers , Access Points (AP), Radio Frequency (RF), Mobility, Security, Mesh and Flex Configurations. “WCAE” provides state of art RF summary including stats summarization at WLC, AP group, Flex group level and RF health analysis at WLC, AP group, Flex group level.
Get the experience of hundreds of cases applied to your network in seconds
AP Data Summarization
Get list of AP HW types and operational modes in use
Quick data summarization for main RF stats, see what is happening at WLC, or AP group/Flex group levels
Simplified RF analysis tool, translate those RF statistics into simple Health report
Log File Summarization
List all messages in a short list, get counts and initial/end time
WLC running AireOS
File Types Supported
Sh run-config -> recommended option, gives you more bang for the buck
WCAE is a public facing tool and anyone with a valid CEC ID can enjoy its benefits. Please feel free to share this tool with your customers and partners. Note: Ensure that pop-up block is disabled for the page on your browser to run the script. Here are some cool screenshots from WCAE:
Hello. Have IW3702-2E with x4 AIR-ANT2568VG-N 2.5/5.0Ghz 6/8 dBi Omni antennas.AP is in autonomous mode ap3g2-k9w7-tar.153-3.JI4.tar. I have run several copy test`s;2.4ghz I can connect 144Mbit only, cause there is only 20Mhz mode avai...
Hello everybody,I have an issue where the captive portale won"t work properly, the problem is that I have control over the WLC only and not adipsys platform I think I did what should be done in the WLC following the official guide provided by adipsys...
I am a student at Pioneer Technology Center, Ponca City, Oklahoma. We have a Cisco 1950 Series wireless router that we wish to configure as a wireless hotspot. I am interested in how the router manages wireless connections and I would like to see a diagra...
Hello All, Having a very difficult time getting my 1702i AP to join WLC 2504. This is working fine when direct connected to PoE port on device, but when I attempt to connect to edge switchport (configured for same VLAN as AP-manager) the connec...
I am trying to setup evaluation licenses on a Catalyst 9800-CL appliance. I was told all you have to do was registered it under your Cisco smart account, and it will automatically activate the evaluation licenses for the appliance under your account. I re...