Happy to Introduce “Wireless Config Analyzer Express” the next gen cloud based evolution of the WLC Config Analyzer (WLCCA) with powerful checks for Wireless LAN Controllers , Access Points (AP), Radio Frequency (RF), Mobility, Security, Mesh and Flex Configurations. “WCAE” provides state of art RF summary including stats summarization at WLC, AP group, Flex group level and RF health analysis at WLC, AP group, Flex group level.
Get the experience of hundreds of cases applied to your network in seconds
AP Data Summarization
Get list of AP HW types and operational modes in use
Quick data summarization for main RF stats, see what is happening at WLC, or AP group/Flex group levels
Simplified RF analysis tool, translate those RF statistics into simple Health report
Log File Summarization
List all messages in a short list, get counts and initial/end time
WLC running AireOS
File Types Supported
Sh run-config -> recommended option, gives you more bang for the buck
WCAE is a public facing tool and anyone with a valid CEC ID can enjoy its benefits. Please feel free to share this tool with your customers and partners. Note: Ensure that pop-up block is disabled for the page on your browser to run the script. Here are some cool screenshots from WCAE:
I have a single 3802i with CME 8.5.151. The wireless clients can ping their default gateway and any other wireless host. These same wireless clients cannot ping any non-wireless (aka wired) host on the same subnet. I've been looking thro...
Hi all, The wireless setup in my work environment uses AIR-AP2802I access points and they are managed by AIR-CT3504 WLC.My endpoints are mainly microsoft surface pro notebooks and notice the wireless bandwidth on all these notebooks is capp...
Hello everybodya few weeks ago I faced a major breakdown in the network because of a failure on the DHCP server.After a unpredictable power outage the APs came up and they couldn't contact the DHCP. Because this service is controlled by another team that ...
Dear,I have a CORE switch, which is a root bridge of all VLANs in my environment. I want to use flex-link on a particular port. When I set the flex-link feature on my CORE switch interface, will this cause Spanning-tree to be disabled only from the interf...