VPN disconnects from Wlan guest on 5508 Wireless LAN Controller
It appears that on the Guest Wlan, after random amount of time an established VPN connection using Cisco VPN client disconnects.
Wireless connectivity doesn't appear to go down, just the vpn connection.
We have 2 Wlans, 1 is production authenticates our Domain controllers which is working fine. The other is a Wlan that has restricted access internally, I allow http, https and VPN access out only.
QOS bronze is configured on guest Wlan.
Upgraded 5508 WLC to latest and greatest code and but still seeing same issue.
The session timeout would mean we would see a deauth every 30 minutes which could be your issue. But we had a similar problem on 22.214.171.124. When users would VPN they would disconnect randomly. While others on guest without VPN stayed up and was fine.
We moved to 126.96.36.199 and it seemed to fix the VPN guest issue for us.
Well that's basically what we were seeing as well.. Random VPN disconnects. We have upgraded to 188.8.131.52 and we saw the same issue after the initial reboot of the WLC but haven't seen it since...Its possible that we might of killed the ping on that test and got hit with a deauth at the 30 min mark.
Right now both laptops are up into a VPN session with no issues and issue is fixed.
I would like to get some clarification regarding the user idle timeout WLAN configuration checkbox. I read on here that if you don't configure a idle time-out value within the WLAN the global system parameter will be used instead (which is 300 ...
Hi team,I pulled report from NCS for AP utilization, it gives multiple instance for same AP in AP Client statistics summary. ANy specific reason why its giving multiple instance. We are fine if its give two, becaus eof readio but single AP gives for insta...
Hello for everybody. There is a network of 5 remote sites and a central data center. We plan to implement the following wifi scheme - there are two wlc 3504 (high availability - one active and one standby ) in the central dc, to which all ap 2800 ser...
Hi Friends I have more Cisco Ap(Air-Cap-2702 E-E-K9 int my company everthing is ok but i have 2 problem1) When some user connect to specialy one AP these users after 2-3 minute disconnect from wifi what is reason? 2.4Ghz and 5GHZ is active . i ...
When connecting to the wireless network I have noticed that the clients will often skip an AP 10 feet away and connect to one two floors up and 100+ feet away. That doesn't sound very efficient and data rates are pretty poor.Can this be fixed?My test clie...