For any new issue during this test, please write to email@example.com, pre-existing problems would be directed through normal TAC support channels, the image is TAC supported until CCO release of final code
AS_5500* can be used for Wism2/2500/5500 controller types
AS_7500* can be used for 7500/8500
AS_CTVM can be used for vWLC
Issues fixed on this release
CSCun37799 VideoStream fails with 7.6 on WPA2 SSID
CSCum68243 Corfu: dot11 ant-band-mode command is missing in autonomous image
CSCuj17283 ap3700 uses 8 replay counters w/ clients that support only 1 (ARP fails)
CSCum16566 Corfu SKU-C :- fix ETSI domain 2.4Ghz radio config for 802.3at power
Hello team, Im new in the wireless world and I'm reading docs about the controller Catalyst 9800-CL and I'm facing some doubts, we can see 3 interfaces in the manual, they are:1- Device Management interface;2- Wireless Management interface;3- High Av...
I have 1800S Sensor Image Version 126.96.36.199 provisioned with wired backhaul to DNAC version 188.8.131.52When sensor is connected on subnet with DHCP Option 43 for the DNAC, I'm able to login to console and SSH with the SSH password configured in DNAC.When ...
Hello Everyone! I have two types of RF cables AIR-CAB005LL-N and CAB-L400-5-N-N According to specs AIR-CAB005LL-NN(m)-STR to N(m)-RALMR-400, 5 foot RF cableType: outdoor DB (direct burial) CAB-L400-5-N-NN(m)-STR to N(m)...