7.6MR3 (188.8.131.52) is now posted in CCO. Beta for this release is over, thanks!
For any new issue during this test, please write to firstname.lastname@example.org, pre-existing problems would be directed through normal TAC support channels, the image is TAC supported until CCO release of final code
AS_5500* can be used for Wism2/2500/5500 controller types
AS_7500* can be used for 7500/8500
AS_CTVM can be used for vWLC
Issues fixed on this release
Multiple Vulnerabilities in IOS/IOSd OpenSSL - June 2014
Jian crashed with DP watchdog on image 184.108.40.206
Corfu: Handle all NF timeouts during hal reset
WLC crash at task name 'aaaQueueReader' w/ 220.127.116.11
AP shows logs with 'Bad refcount in datagram_done' traceback
PR: Saber crash with envMonitorStatus missed software watchdog
BGL-Alpha: 5500/WISM2 crashed with task name "spamApTask1"
Memory corruption crashes in cac_parent_timer by rrm neigh tbl overwrite
Static TX power level changes to Max after AP reboot
Memory Leak with Internal webauth in a loop for longer period
WISM2 multiple crashes on 7.6MR3 - Bonjour_Msg_Task
High CPU 99% on webauth Redirect Task 18.104.22.168
2504- Display new Dashboard after user login
Ap3602 trying to contain its own RM3000AC module
3602 AP crashes in proc IPAM Manager
Memory corruption on OpenSSL, 22.214.171.124
7.6mr3-Beta - WLC crash : spamGetRadGroupName
FlexConnect Vlan mode was changed to Disabled after power cycle
apple client cannot authenticate on 1130 1240 running 7.6 code with FT
AP3602 with RM3000AC module not able to pass traffic
Gradual memory leak in 2048 byte chunks
HIGH CPU (98%) on webauthRedirect
PMIPv6 - Add sshpm Rules for PMIPv6 Control only when MAG enabled
AP1532E/I bridge throughput is very low on 802.11n
Radio Reset: (SC2) sensord crash due to dot11 driver off-channel timeout
AP sends FT-auth original and retry packet to WLC causing MIC mismatch
Clean Air: Stale Bluetooth Device Entries in down state in AP with WSSI
WIPS-Rogue APs are mistaken as infrastructure devices
CAPWAP causing APs to disassociate due to DTLS errors
AP 1600 intermittent low throughput (<1-2mpbs)
FlexConnect: per-user ACL + WebAuth, success/logout page not displayed
3700 AP 5ghz clients stop forwarding traffic under load with Tkip
Wi-Fi: AP1600 drops packets when a burst of A-MSDU data is received
My c9800-40 pair always shows and Red(Amber) Alarm led on the active unit. At first I thought it was the stand-by unit but no it be the active unit and toggles between boxes if I trip failover.There is no such behavior documented . Documentati...
Hi Team, Could you help me with this?I want to configure more than one AP like RAP on the same MESH, should there be any consideration in the configuration of that MESH, the RAPs or the MAPs that I need to know?I mean if there is a priority or ...
Hi, I have the wrong image and cant reset it, also when i type i get weird letters Please tell what need to do? below is the what have on CLIi have the wrong image and cant reset it, alsoAP003a.7d09.17d8>dnIOS Bootloader - Starting syste...
So normally when I update a couple of SSO WLCs I: download the software to WLCs, predownload to the APs, swap AP image, save system settings and then do a scheduled reload because thats the only command I know of where you can also reboot all the AP...