7.6MR3 (220.127.116.11) is now posted in CCO. Beta for this release is over, thanks!
For any new issue during this test, please write to firstname.lastname@example.org, pre-existing problems would be directed through normal TAC support channels, the image is TAC supported until CCO release of final code
AS_5500* can be used for Wism2/2500/5500 controller types
AS_7500* can be used for 7500/8500
AS_CTVM can be used for vWLC
Issues fixed on this release
Multiple Vulnerabilities in IOS/IOSd OpenSSL - June 2014
Jian crashed with DP watchdog on image 18.104.22.168
Corfu: Handle all NF timeouts during hal reset
WLC crash at task name 'aaaQueueReader' w/ 22.214.171.124
AP shows logs with 'Bad refcount in datagram_done' traceback
PR: Saber crash with envMonitorStatus missed software watchdog
BGL-Alpha: 5500/WISM2 crashed with task name "spamApTask1"
Memory corruption crashes in cac_parent_timer by rrm neigh tbl overwrite
Static TX power level changes to Max after AP reboot
Memory Leak with Internal webauth in a loop for longer period
WISM2 multiple crashes on 7.6MR3 - Bonjour_Msg_Task
High CPU 99% on webauth Redirect Task 126.96.36.199
2504- Display new Dashboard after user login
Ap3602 trying to contain its own RM3000AC module
3602 AP crashes in proc IPAM Manager
Memory corruption on OpenSSL, 188.8.131.52
7.6mr3-Beta - WLC crash : spamGetRadGroupName
FlexConnect Vlan mode was changed to Disabled after power cycle
apple client cannot authenticate on 1130 1240 running 7.6 code with FT
AP3602 with RM3000AC module not able to pass traffic
Gradual memory leak in 2048 byte chunks
HIGH CPU (98%) on webauthRedirect
PMIPv6 - Add sshpm Rules for PMIPv6 Control only when MAG enabled
AP1532E/I bridge throughput is very low on 802.11n
Radio Reset: (SC2) sensord crash due to dot11 driver off-channel timeout
AP sends FT-auth original and retry packet to WLC causing MIC mismatch
Clean Air: Stale Bluetooth Device Entries in down state in AP with WSSI
WIPS-Rogue APs are mistaken as infrastructure devices
CAPWAP causing APs to disassociate due to DTLS errors
AP 1600 intermittent low throughput (<1-2mpbs)
FlexConnect: per-user ACL + WebAuth, success/logout page not displayed
3700 AP 5ghz clients stop forwarding traffic under load with Tkip
Wi-Fi: AP1600 drops packets when a burst of A-MSDU data is received
I currently have a set of 5508 WLC's that is handling my wireless environment. Need to add an Anchor Controller to handle the Guest wireless network. Can I have a 9800-L as the Anchor or do I need to use a 3504? Thanks
Hello, i have make this setup for the acess point and i get lost somewhere. i have a Cisco C887VA, router with secondary core for the acce point. version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime...
Hi guys,This command configures the syslog host for all APsconfig ap syslog global host x.x.x.xAnd this command configures the syslog host on the WLCconfig logging syslog host x.x.x.xIs the result of both commands the same?Can both commands be used?Are th...
Good day.We have a customer based in Russia that uses WLC2504 + some of APs with R-reg.domain(1815i-R , 3702i-R, 3802i-R) Now now that customer bought some new APs that have E-reg.domain Is it enough to change the country code support on th...
Hi, We have a WLC 9800-40 (16.12.4a). Sometimes after successful authentication against RADIUS, by a user in a WLAN 802.1X enabled, User Name remains 'Unknown' in the controller monitor, despite being associated a long time ago. Because of that, our ...