Final build posted to CCO. 188.8.131.52, beta is closed
Thanks for your interest!
For any new issue during this test, please write to email@example.com, pre-existing problems would be directed through normal TAC support channels, the image is TAC supported until CCO release of final code
AS_5500* can be used for Wism2/2500/5500 controller types
AS_7500* can be used for 7500/8500
AS_CTVM can be used for vWLC
Issues fixed on this release
CSCur88408 LAP doesnt send discovery request to WLC IP discovered by DNS resolution
CSCur56103 Jian Active Silent crash
CSCuq27304 Apple IOS7 devices not able to pass traffic in 11v+FTDot1x wlan
CSCur44620 Radio reset after Flex+Bridge AP recovers from standalone
CSCur43050APs mfg in September/October 2014 unable to join an AireOS controller
CSCur42201 Crash on WLC apf_rogue_rule.c:2415
CSCur27551SSLv3 Poodle attack against https in wlc, CVE-2014-3566
CSCuq73468 Radius AP users not synchronizes after standalone-Connected transition
CSCur486001530 crashes after radio failure
CSCur12358 1532 AP channel announce on DFS not working
CSCur27399 ap702w lan port wired client traffic gets disturbed.
CSCur16761 outdoorAPs going to Local mode with "clear capwap privateconfig" command
CSCuq81885 DHCP fails Flexconnect Local Switching MAC Filtering RADIUS VLAN assign
I currently have a set of 5508 WLC's that is handling my wireless environment. Need to add an Anchor Controller to handle the Guest wireless network. Can I have a 9800-L as the Anchor or do I need to use a 3504? Thanks
Hello, i have make this setup for the acess point and i get lost somewhere. i have a Cisco C887VA, router with secondary core for the acce point. version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime...
Hi guys,This command configures the syslog host for all APsconfig ap syslog global host x.x.x.xAnd this command configures the syslog host on the WLCconfig logging syslog host x.x.x.xIs the result of both commands the same?Can both commands be used?Are th...
Good day.We have a customer based in Russia that uses WLC2504 + some of APs with R-reg.domain(1815i-R , 3702i-R, 3802i-R) Now now that customer bought some new APs that have E-reg.domain Is it enough to change the country code support on th...
Hi, We have a WLC 9800-40 (16.12.4a). Sometimes after successful authentication against RADIUS, by a user in a WLAN 802.1X enabled, User Name remains 'Unknown' in the controller monitor, despite being associated a long time ago. Because of that, our ...