Final build posted to CCO. 22.214.171.124, beta is closed
Thanks for your interest!
For any new issue during this test, please write to firstname.lastname@example.org, pre-existing problems would be directed through normal TAC support channels, the image is TAC supported until CCO release of final code
AS_5500* can be used for Wism2/2500/5500 controller types
AS_7500* can be used for 7500/8500
AS_CTVM can be used for vWLC
Issues fixed on this release
CSCur88408 LAP doesnt send discovery request to WLC IP discovered by DNS resolution
CSCur56103 Jian Active Silent crash
CSCuq27304 Apple IOS7 devices not able to pass traffic in 11v+FTDot1x wlan
CSCur44620 Radio reset after Flex+Bridge AP recovers from standalone
CSCur43050APs mfg in September/October 2014 unable to join an AireOS controller
CSCur42201 Crash on WLC apf_rogue_rule.c:2415
CSCur27551SSLv3 Poodle attack against https in wlc, CVE-2014-3566
CSCuq73468 Radius AP users not synchronizes after standalone-Connected transition
CSCur486001530 crashes after radio failure
CSCur12358 1532 AP channel announce on DFS not working
CSCur27399 ap702w lan port wired client traffic gets disturbed.
CSCur16761 outdoorAPs going to Local mode with "clear capwap privateconfig" command
CSCuq81885 DHCP fails Flexconnect Local Switching MAC Filtering RADIUS VLAN assign
Hi all,we have have deployed Meraki mx firewall,switch and Meraki mr20 and mr33.we are unable to view location analytics..below is the error we get.(Analytics data cannot be displayed for this network. Data is only available for wireless networks with the...
Dear Experts, I have now 40 Access Points ( Indoor 3800 and OutDoor 1560) and 2x WLC 9800. If I want to encrypt management CWAPP and data wireless traffic with DTLS between WLC and Access Points ( Indoor or Outdoor), how many DTLS license ...
Hi All, We need to design a wireless network for one of our customers. Users - Employees, GuestsEndpoints - Corporate Owned devices part of domain, Personal devices (Laptops/Mobiles/Tablets), VC Endpoints We have thought of setting up a wir...