In addition, use the Cisco Aironet Client Utility (ACU) for LEAP login and disable the Windows XP setup utility by referring to the How to Run LEAP on Windows XP section of Cisco Aironet Wireless Client Adapters and Windows XP Systems: Drivers and LEAP.
Note: When using LEAP, special attention should be paid to the use of strong passwords. Cisco LEAP is a password-based algorithm. To minimize the possibility of a successful dictionary attack, use strong passwords, which are difficult to guess. These are some characteristics of strong passwords:
A minimum of ten characters
A mixture of uppercase and lowercase letters
At least one numeric character or one non-alphanumeric character (example: !#@$%)
No form of the user's name or user ID
A word that is not found in the dictionary (domestic or foreign)
Client / Device cannot authenticate
WLAN adapters (wireless card) / ACU (Aironet Client Utility)
There are many SKUs in 9120 list, like C9120AXI-x, C9120AXE-x and C9120AXP-x which is stated as "Cisco Catalyst 9120AXP Access Point: Indoor, professional installations"What is the difference between C9120AXI-x and C9120AXP-...
Hi Experts, I'm getting multiple alerts from Prime regarding the issues in Access points. below is the log message.''Message: Access point 'XXXXXX' associated with controller 'XXXXX' draws low power from Ethernet. Failure reason: 'The AP draws 15.4 w...
Good morning,in our company building we use an vWLC (18.104.22.168) with several 3602i and 1142 APs (hence the old software).We plan to upgrade our network to C9115 with EWC.Question:Is it possible to use EWC and vWLC in parallel with the same SSIDs (like Mob...
I have Wireless network with AIR-AP1832 APs and CT-3504 controller (OS Ver.: 22.214.171.124). All is working fine except iPhone 12 Pro Max with iOS 14.5.1, which disconnects from network frequently.Can anyone help in this regard? WLC Config is attached