The output is presented in CSV format, for easy processing with any common spreadsheet application.
This version adds the capability to import AP information with no direct connection to the WLC, either through a static AP list specified in the config.ini file, or by importing the raw output of the "show ap join stats summary all" in one or more text files.
All platforms: paramiko / pycrypto / ecdsa From CLI:
pip install paramiko pycrypto ecdsa
The “pip” command requires internet access to reach the PyPI repositories via HTTPs. Should the above commands on CLI return a “file not found” error, execute the command after changing directory to the “Scripts” directory under the python installation, e.g. C:\Python27\Scripts\
The host running the script needs to have network connectivity (SSH and/or Telnet) to the Access Points. Connectivity to the Wireless LAN Controller(s) is also required unless AP information is imported through text files (version 1.2.1).
Installation and Configuration instructions:
Please refer to the release notes PDF document for more details.
The tool and documentation can be downloaded from this repository (CCO account required):
Hi Guys,Is it possible to set up a port number for syslog on WLC 5520? On the switch we can set it up by issuing the command logging "host 192.168.100.100 transport udp port 5678", but so far I did not find it for WLC.
First time setting up a network with WLC. WLC is configured and can both web browse and SSH into it. It currently has 1 SSID configured. I hardwire one of the APs into port 3 (PoE port) and it doesn't receive the SSID configuration.WLC Firmware...
Hi， I dont have wlc for testing.I want to know what is meaning of “ping request and response” in wlc GUI “monitor > redundancy > statistics”.Is it represents do a auto ping or manual ping on active wlc and standby wlc? And whether the “sen...
HelloI have a cisco controller 5520 with more than 300 access points joining it, I found that most of the access points like 250 out of 300 are working on the maximum power level 1 on 5g band only, while on 2.4 bands the power level is within normal level...