The output is presented in CSV format, for easy processing with any common spreadsheet application.
This version adds the capability to import AP information with no direct connection to the WLC, either through a static AP list specified in the config.ini file, or by importing the raw output of the "show ap join stats summary all" in one or more text files.
All platforms: paramiko / pycrypto / ecdsa From CLI:
pip install paramiko pycrypto ecdsa
The “pip” command requires internet access to reach the PyPI repositories via HTTPs. Should the above commands on CLI return a “file not found” error, execute the command after changing directory to the “Scripts” directory under the python installation, e.g. C:\Python27\Scripts\
The host running the script needs to have network connectivity (SSH and/or Telnet) to the Access Points. Connectivity to the Wireless LAN Controller(s) is also required unless AP information is imported through text files (version 1.2.1).
Installation and Configuration instructions:
Please refer to the release notes PDF document for more details.
The tool and documentation can be downloaded from this repository (CCO account required):
I've worked with the AiroNet 1830's and 50's for a little while now, but they've all been on a single LAN, I would like to use the same AP's to offer both public and private access. I assume I'd need a layer 3 switch to do this? If so, h...
When i try to connect an AP on a specific VLAN the AP is constantly blinking green, and i get this error message from the AP using an console cable "Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP." If i...
Hi, I recently got a CISCO AP1852i (running Mobility Express 220.127.116.11) and I'm struggling to set up a working wlan (meaning with internet connection).I believe most of my issues come from the fact it's not a standalone AP but rather a hybrid device ...
The cisco switch has a PoE budget of 195w and the AP's draws about 15-17w, so it should be possible to connect at least 11 AP's.This works fine with HPE and Huawei switches, but with cisco switches it reserves 30w per AP so we can only get 6 AP's running....