The output is presented in CSV format, for easy processing with any common spreadsheet application.
This version adds the capability to import AP information with no direct connection to the WLC, either through a static AP list specified in the config.ini file, or by importing the raw output of the "show ap join stats summary all" in one or more text files.
All platforms: paramiko / pycrypto / ecdsa From CLI:
pip install paramiko pycrypto ecdsa
The “pip” command requires internet access to reach the PyPI repositories via HTTPs. Should the above commands on CLI return a “file not found” error, execute the command after changing directory to the “Scripts” directory under the python installation, e.g. C:\Python27\Scripts\
The host running the script needs to have network connectivity (SSH and/or Telnet) to the Access Points. Connectivity to the Wireless LAN Controller(s) is also required unless AP information is imported through text files (version 1.2.1).
Installation and Configuration instructions:
Please refer to the release notes PDF document for more details.
The tool and documentation can be downloaded from this repository (CCO account required):
Hello friends. I have several AIR-AP1852I-E-K9 and AIR-AP1562E-E-K9 administered centrally in a controller which is configured in one of the AIR-AP1852I-E-K9. Specifically the AIR-AP1562E-E-K9 are attached with two AIR-ANT2547VG-N antennas connected...
Good day.We have Cisco WLC 2504 with fw ver. 126.96.36.199 that already works with few access points.We purchase new AP 1815i but it has 188.8.131.52 fw ver ( newer than WLC ) All other APs, that we connect to WLC earler, was automaticly updated t...
- AP1 Model : WAP581-A-K9 V01 Firmware Version (Active Image): V184.108.40.206- AP2 Model : WAP581-A-K9 V01 Firmware Version (Active Image): V220.127.116.11- AP3 Model : WAP581-A-K9 V01 Firmware Version (Active Image): V18.104.22.168 Three APs are being used, and ...
Hi All,Need help in understanding RRM for 80 MHZ. We have channel width 80 MHz and because of this , we found channel overlapping. We set channel interval time with 10 minutes (default) and DCA set as automatic. But we are not seeing channel change h...
Greetings,I have outdated AIR-BR1310 with broken configuration. This is not about fixing it, but mostly about understanding why it works like it works. BR1310 is connected via trunk interface. Native VLAN have nothing, VLAN 26 is for wireless and VLA...