The output is presented in CSV format, for easy processing with any common spreadsheet application.
This version adds the capability to import AP information with no direct connection to the WLC, either through a static AP list specified in the config.ini file, or by importing the raw output of the "show ap join stats summary all" in one or more text files.
All platforms: paramiko / pycrypto / ecdsa From CLI:
pip install paramiko pycrypto ecdsa
The “pip” command requires internet access to reach the PyPI repositories via HTTPs. Should the above commands on CLI return a “file not found” error, execute the command after changing directory to the “Scripts” directory under the python installation, e.g. C:\Python27\Scripts\
The host running the script needs to have network connectivity (SSH and/or Telnet) to the Access Points. Connectivity to the Wireless LAN Controller(s) is also required unless AP information is imported through text files (version 1.2.1).
Installation and Configuration instructions:
Please refer to the release notes PDF document for more details.
The tool and documentation can be downloaded from this repository (CCO account required):
I am trying to setup a 1852 with Mobility Express. I can get it working with most items, however we have a Security Policy in place that says that management traffic should be segmented from other traffic. In a normal WLC situation all the APs are on vlan...
Hello,I have a Cisco 3702i setup in autonomous mode that has been running for a few weeks. I can SSH into it using my new username and password, but can't use this to log into the GUI I have to use the default of Cisco:Cisco, it seems to be the only...
Hello,I only did this a few weeks ago and it was easier, but today I can't reset another spare AP and set it to autonomous. I was originally connected to our WLC so I've consoled in and removed the config.txt and the private-multiple-fs anre reboote...
Hi All, I thought I was getting to grips with the wireless world but I am finding that I am a little out of my depth setting up a test Cisco Catalyst 9800-CL Wireless Controller. This will be my third controller, this one I am testing in a ...