The output is presented in CSV format, for easy processing with any common spreadsheet application.
This version adds the capability to import AP information with no direct connection to the WLC, either through a static AP list specified in the config.ini file, or by importing the raw output of the "show ap join stats summary all" in one or more text files.
All platforms: paramiko / pycrypto / ecdsa From CLI:
pip install paramiko pycrypto ecdsa
The “pip” command requires internet access to reach the PyPI repositories via HTTPs. Should the above commands on CLI return a “file not found” error, execute the command after changing directory to the “Scripts” directory under the python installation, e.g. C:\Python27\Scripts\
The host running the script needs to have network connectivity (SSH and/or Telnet) to the Access Points. Connectivity to the Wireless LAN Controller(s) is also required unless AP information is imported through text files (version 1.2.1).
Installation and Configuration instructions:
Please refer to the release notes PDF document for more details.
The tool and documentation can be downloaded from this repository (CCO account required):
It is a fresh installed Microsoft Surface Pro running Windows 10 connected to Cisco 1815i running the latest versione of Mobility Express.Download speed is slow... VERY slow... terribly slow: less than 1 Mbps in most casesUpload speed is good: 50+ MbpsI t...
Network that I am trying to access is 220.127.116.11/16 and is on VLAN 1 AP01 joins WLC-1 and begins broadcasting SSID "CISCO2_test". Created a vlan 1 interface:Interface Name Port Vlan Id IP Address Type Ap Mgr Guest-------------------------------...
Hi All,We have around 10K wireless clients daily and around 3K AP's (2800,1562,1815w,3600,3700) joined to our 2x 8540 WLC LAG with Nexus9K at 20G in HA. Query 1:We want to use single SSID and based on client OS (Android/iOS/iPadOS/etc or Win/macOS/Li...
My Firmware on my Cisco WAP371 is down level. However, it does not automatically update, and when I try to click on the download icon next to one of my units (in FindIT), I get an error that cannot connect to Cisco at this time. Anyone have a ...