The output is presented in CSV format, for easy processing with any common spreadsheet application.
This version adds the capability to import AP information with no direct connection to the WLC, either through a static AP list specified in the config.ini file, or by importing the raw output of the "show ap join stats summary all" in one or more text files.
All platforms: paramiko / pycrypto / ecdsa From CLI:
pip install paramiko pycrypto ecdsa
The “pip” command requires internet access to reach the PyPI repositories via HTTPs. Should the above commands on CLI return a “file not found” error, execute the command after changing directory to the “Scripts” directory under the python installation, e.g. C:\Python27\Scripts\
The host running the script needs to have network connectivity (SSH and/or Telnet) to the Access Points. Connectivity to the Wireless LAN Controller(s) is also required unless AP information is imported through text files (version 1.2.1).
Installation and Configuration instructions:
Please refer to the release notes PDF document for more details.
The tool and documentation can be downloaded from this repository (CCO account required):
Hi all,Does anybody know how to change the authentication protocol for webauth in 9800? I noticed that WLC webauth on WLC 5508 works with CHAP. The 9800 uses PAP. I haven't found out how to change it to CHAP in 9800. I guess in WLC 5508 it is done in "Con...
Hi, We recently purchased brand new 10 units of Cisco 9115AXP and 1 unit of Cisco 3504 Wireless controller.The issue is, some of the Apple laptop (both MacBook Air and Macbook Pro) users couldn't see the SSID and if they see and connect, the connecti...
We are migrating a site from 5508 WLCs with 3502 APs towards a 9800 WLC with 9120 APs. To support a rip and replace scenario we loaded the 5508 with the 8.5MR5ircm image so roaming between the old and new network would be possible. DHCP has been setup wit...
We are running 126.96.36.199 on a Cisco WLC 2504. Wired clients are using SLAAC by using router advertisement packets to give themselves IPv6 addresses, and IPv6 works. IPv6 on the WLAN doesn't work for some reason. This document talks about setting...
I am wondering how one of these NIM's should work if you plug a non MIMO compliant antenna into the diversity input. Will it use both antenna connections or will it only use one?I have a situation where i have two antenna (in a Cisco 4G-LTE-ANTM-O-3-B) wi...