AnyConnect Secure Mobility Client 3.0: Network Access Manager & Profile Editor on Windows
Use the Cisco AnyConnect Network Access Manager Profile Editor to build custom profiles for the AnyConnect Secure Mobility Client. Applies to version 3.0.x.
The AnyConnect Secure Mobility Client 3.0 has a nice module for managing wireless (and wired) networks in Windows. This module is called the Network Access Manager. For a wireless administrator who wants to have a ubiquitous supplicant and end-user interface experience on a range of Windows client machines (XP, Vista, 7), this little connection management utility fits in nicely.
Installing the AnyConnect client with the Network Access Manager module is relatively painless. What's not as easy (at least it wasn't for me) is figuring out how to create and deploy pre-configured .XML profiles* instead of using the default profile included with a bare-bones AnyConnect NAM install.
The profile determines the degree of control the end-user has over their network configurations, which authentication and encryption types they can use, if there are required (non-removable) networks in the list, the order of preferred networks, if they can add their own networks, etc. The degree of restriction an administrator applies with the configured profile is a matter of organizational policy or administrative preference, but the default is a wide open policy.
The first thing to realize is that profiles are deployed at AnyConnect Client install time. Each time you want to update a profile, you need to essentially re-install the client or redeploy the package through enterprise software distribution methods. This isn't a big deal, and the benefit to this is that it makes it difficult for end-users to tamper with or accidentally remove installed profiles because there is no in-application way to switch profiles. The result is a clean, well-designed and intuitive interface with intentionally and appropriately scoped options, and one that should be easy for most administrators and helpdesk technitians to support.
The default profile wasn't working for me on my lab laptop because I needed to remove the Wired interface so I could access the machine over RDP and still connect to wireless networks for testing and demonstrations. Here's what I did to create my own NAM profile and deploy it onto my lab laptop:
NOTE: Before proceeding, if you already have NAM installed, uninstall it first and follow prompts to reboot your system. After the reboot, delete the following folder from your system to remove the previous configuration files:
If you do not manually delete the previous configuration, the custom configuration you create in the following steps will not be applied.
This process needs two separate downloads from CCO. Both are available under the AnyConnect section:
predeployment .iso (contains the installers for all of the modules): e.g., anyconnect-win-3.0.5080-pre-deploy-k9.iso
standalone profile editor (used for creating and editing .XML profiles): e.g., anyconnect-profileeditor-win-3.0.5080-k9.exe
1. Unpack the downloaded pre-deployment .ISO file (your first download) to a folder on your Desktop, e.g., unpackedAnyConnectIsoFolder; all of the component module .MSIs (NAM, VPN, Posture, etc.) and the main setup.exe will be there along with a few folders. You can use 7Zip or a similar program to access the .ISO as you would a .zip or .tar file (i.e., you don't need to burn the image to CD).
2. Install and run the standalone profile editor (your second download); you only need the Network Access Manager component
a. Once installed, open the profile editor and configure a new profile, e.g. allow EAP types, disable Wired port management, etc.
b. File / Save as...
c. Name the file configuration.xml. This naming convention is required
d. Save the configuration file to the/<unpackedAnyConnectIsoFolder>/Profiles/nam folder
3. Run the main Secure Mobility Client setup installer (setup.exe) from <unpackedAnyConnectIsoFolder>. This installs the AnyConnect framework and modules. Select the Network Access Manager modules. No other modules are necessary or required for managing wireless networks
4. When the AnyConnect client next launches, you should be able to see your profile configurations integrated into the AnyConnect window.
This is a rough guide, but hopefully it will save others some time figuring out the rather mysterious process of deploying NAM profiles. I didn't find this specific series of steps outlined in any one document online, but if anyone has better information or a clearer set of steps, I'll be happy to link them here.
Here are some additional resources that should help with more granular configuration details:
* The term "profiles" here does not refer to an individual wireless network profile (SSID). In this document, it refers to the collective set of policies and permissions that enable/disable functionality within the AnyConnect NAM module.
Community Manager update:
Profile Editor after installation
As Aaron shared, If you want to run the Profile Editor after installation, and apply it to an installed NAM supplicant, without rerunning setup.exe, you can do this:
Edit the profile with Profile Editor, as described in Step 2 a through c above. However, save configuration.xml to C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\system instead.
Apply the updated profile to the running NAM supplicant by right-clicking the NAM icon in the taskbar and selecting "Network Repair".
The updated profile settings should appear in the NAM supplicant immediately.
One more trick - if the goal is to use NAM as a wireless supplicant, but have it not control the LAN adapter, then you can just go into the adapter properties and uncheck "Cisco AnyConnect Network Access Manager Filter Driver".
Another option what Benjamin shared, if you have the NAM Profile Editor installed on the same computer as the NAM Client, simply open and edit and save the file stored at (on Windows 7):
From what I read, the maximum allowed clients under this configuration is 200, yet the 5508 controller supports up to 7000 clients? How is that possible with just 2 bands, 2.4 and 5 GHz, each only supporting maximum 200 for each band? Am I missi...
Hello Everyone,I’m working on the WLAN environment based on AIR-AP3802I-E-K9 with WLC 5529 188.8.131.52. For unknown reason some wireless clients (connected based 2,4GHz – 802.11g) just disappear from the network.Based on my observation, at least part of dis...
Anybody here to happen to have a fairly fresh Prime 3.9 installation (without a recovered application backup)?
I'm wondering something about the "Assurance And Health Summary" Job Dashboard.
Which jobs do you have there for a fairly fresh installat...
Hi i have a some AP1562I that are running Mobility express 184.108.40.206 one as a WLC and others as AP, but looking to upgrade it to the latest version but couldn't find out if i could upgrade straight to 220.127.116.11, or if not which versions I would...
Hello, I have a network with 350 Cisco 1810W access points that are connected to Cisco 3650 PoE switches. I have noticed that the APs are drawing almost the full 30W per port. I believe these APs should only be drawing 8 to ...