Can the Cisco Aironet Autonomous access point be converted to Lightweight Access Point Protocol (LWAPP) using the CLI?
The access points (APs) cannot be converted from autonomous mode to LWAPP mode via the CLI. The Upgrade Tool is the only method you can use. A newer version of the Upgrade Tool (version 1.7) will be available soon and is able to convert more than one AP at a time. In order to download any images, firmware versions, tools, and so forth, refer to the Wireless Download page.
Obtaining the Upgrade Tool and Upgrade Image
The autonomous mode to lightweight mode access point upgrade process is only supported for access point running Cisco IOS Releases 12.3(7)JA and later. The access points must be upgraded to this version or a later version before they can be converted to lightweight mode. Consult the Cisco Aironet documentation on upgrade procedures for autonomous access points.
You can find the upgrade tool and the upgrade image at the Download Software page on Cisco.com.
You must register or be a registered user of Cisco.com to download software. To find the tool and the software image, follow these steps:
Hello, I am in a situation where I need to rename a huge number of APs which wouldn't be feasible from the GUI. I spent a lot of time trying and searching for a how-to but to no avail!The commands listed under 'ap' don't include a rename! Is the...
I work for an MSP and also do sales into some enterprise clients, I have a client with 4x 3602 APs and another 17x 3702 APs ready to be installed.A colleague of his told him he needs a wireless controller now, he wants to know if that is a requirement, or...
Hello everyone! I'm a beginner in the Wireless world and I want to change most AP names in my topoloogy while using Cisco Prime 3.3 (100+ devices). To achieve this I believe I need to: 1) Export a csv with the APs I want to modify.2) Modify thei...
Hi All- A colleague of mine grabbed a 3702i that I have configured as a workgroup bridge and hung it in the ceiling. I can get to it via ssh / http. Any chance I can convert it to capwap in place. Advice on the procedure.would be a...