Viten Patel is working as Technical Marketing Engineer (Converged Access) at Cisco. He was working as Wireless Escalation Engineer - Cisco TAC and holds many wireless certification like CCIE Wireless, CCNP Wireless, CCNA Wireless, CWNA, CWSP, CWAP, CWNE#146.
This document explains about the Prime Infrastructure WorkFlow for Converged Access. There are 3 WorkFlows (Small network, Large network and Centralized network deployment). This section shows the single switch Small Branch flow.
Below is a reference topology and deployment scenario
The WorkFlow helps deploy the above mentioned features. With just a few clicks you can deploy multiple branch networks with all the wired / wireless best practices for Converged Access.
What is achieved?
Some of the benefits of using the WorkFlow includes --
Simple to use
Masks the configuration complexity
covers most of the deployment scenarios
configure onces, use many times model
intelligence and best practices inbuilt in the tool
Hi all, The wireless setup in my work environment uses AIR-AP2802I access points and they are managed by AIR-CT3504 WLC.My endpoints are mainly microsoft surface pro notebooks and notice the wireless bandwidth on all these notebooks is capp...
Hello everybodya few weeks ago I faced a major breakdown in the network because of a failure on the DHCP server.After a unpredictable power outage the APs came up and they couldn't contact the DHCP. Because this service is controlled by another team that ...
Dear,I have a CORE switch, which is a root bridge of all VLANs in my environment. I want to use flex-link on a particular port. When I set the flex-link feature on my CORE switch interface, will this cause Spanning-tree to be disabled only from the interf...
We are trying to setup an outdoor wireless network with 1532I access point in autonomous mode. We created a 2.4Ghz network with WPA ver 2 and AES encryption. The problem is that some devices stay connected but can't access event to network (LAN or WA...