CiscoSMB_EnableMyMobileWorkforce_Webina...

458

Views

Helpful

Comments

edited on: ‎06-13-2019 ‎09:08 AM

Presentation from the 6.13 Cisco SMB Webinar, "Enable My Mobile Workforce" on Meraki.

Latest Contents

Prevent clients from use XOR 5ghz on Cisco 2802

Created by Christopher Rudi on 07-19-2019 09:52 AM

We have 2802's running 8.3.x code and a fleet of wireless comm badges that operate in 5ghz only. The vendor says to disable FRA which I did but I still see these things connecting to AP's that have the slot 0 radio in 5ghz mode. I would like for the XOR r... view more

AP can't join WLC over the internet

Created by Yea9632 on 07-19-2019 08:55 AM

Hello, I'm trying to make an AP join a controller over the internet, I think I've done all the setup needed to make this work, here's what I did so far : - booted the AP and defined the public IP address of the WLC in the WLC managers list( NAT ... view more

AP failed to join

Created by leyakhath muhammed on 07-18-2019 10:04 PM

we have this AP AIR 2802E working as ME(controller), its firmware is 8.6.101.0 and backup firmware is 8.8.120.0 But a few AP (2802E) can be upgraded and is working, other APs(AIR2802) cannot be upgraded, so cannot join to ME (controller)&... view more

WLC 5508 Web Authentication issue with RADIUS WIN2012 NPS

Created by sony_issac on 07-18-2019 01:56 PM

Hi,We have a WLC 5508 with 2 WLAN. One with 802.x WPA2 authentication and Second one with Web splash page authentication.We have a Radius server 2012 NPS. WAP2 802.x authentication work with Radius server.IssueSecond wlan Web splash page authenticat... view more

Prime 3.4 training ?

Created by JohnW63 on 07-18-2019 09:28 AM

I'm sort of new to the job and I am having difficulty getting a good grasp of all the templates, profiles, SSID, etc in the Features and Technologies section of Prime Infrastructure 3.4. I'm trying to figure out how they are related and what order to make... view more

CreatePlease to create content

CiscoSMB_EnableMyMobileWorkforce_Webinar_Presentation_6.13