Special attention should be paid to the use of strong passwords. Cisco LEAP is a password-based algorithm. To minimize the possibility of a successful dictionary attack, use strong passwords, which are difficult to guess. Some characteristics of strong passwords include the following:
A minimum of ten characters.
A mixture of uppercase and lowercase letters.
At least one numeric character or one non-alphanumeric character (example: !#@$%).
No form of the user's name or user ID.
A word that is not found in the dictionary (domestic or foreign).
Client / Device cannot authenticate
Associated but cannot pass any traffic
WLAN adapters (wireless card) / ACU (Aironet Client Utility)
Hi all, I must implement QoS on a 5520 WLC already working in local mode, I am new to QoS on WLC and I can't find much on the web. Any help for a usefull guide of how to configure QoS on WLC? I know differences between DSCP, ToS, CoS, and DSCP i...
Hi,I just upgraded firmware of WLC to 17.3.20200621 but after the upgrade, whenever i login to controller it shows password policy message.I tried configuring password policy by going to Configuration -> AAA -> AAA Advanced -> Password policymade...
hi everybody i have tested wired guest lan with one C9800 Foreign in the LAN and one C9800 Anchor in the DMZ.it works very well with this.but with this architecture "foreign/anchor", i must have 2 C9800 and use a DMZ. it's possible to use a gues...
Hi,Currently have a couple of C9800 controllers in a LAB environment for a POC. They both at this time connect to the same switch but on different subnet's so no firewall to consider. Each WLC can ping each other, yet I am struggling to bring up the ...