In the document Cisco TAC escalation engineer "Viten Patel" has explained "How to Configure SSID for Central Web Authentication (CWA) using ISE on Catalyst 3850 Switches and 5760 Wireless Controller".
Unified Access CT5760 Wireless Controller
The CT5760 Wireless LAN Controller (WLC) is the first Cisco IOS® software-based controller built with smart ASIC intended to be deployed as a centralized controller in the next generation unified wireless architecture. CT5760 controllers are specifically designed to function like the older unified model central wireless controllers. They also support the newer Mobility functionality with Next Generation Wireless Controllers 3850 switches in the wireless architecture.
CT5760 controllers are deployed behind a core switch/router. The core switch/router is the only gateway into the network for the controller. The uplink ports connected to the core switch are configured as EtherChannel trunk to ensure port redundancy.
This new controller is an extensible and high performance wireless controller, which can scale up to 1000 access points (AP) and 12,000 clients. The controller has eight 6-10 Gbps data ports.
As a component of the Cisco Unified Wireless Network, the 5760 series works in conjunction with Cisco Aironet Access Points, the Cisco Prime Infrastructure, and the Cisco Mobility Services Engine to support business-critical wireless data, voice, and video applications.
Unified Access Catalyst 3850 Switches
The Unified Access Catalyst 3850 switch is a flexible ASIC-based hardware that can support multiple protocols and has many advantages over the current hardware platform. The Catalyst
3850 switch has an integrated hardware-based wireless support with Control and Provisioning of Wireless Access Points (CAPWAP) and fragmentation. It also has 40 GB of uplink bandwidth when all ports function at line rate.
The Catalyst 3850 switch provides an open service platform. It has a 4-core CPU to leverage the operating system (OS) and to host various services. The Catalyst 3850 hardware is the next- generation switching hardware.
The UA Catalyst 3850 switch has unified wired and wireless architecture. The wireless operating system is Cisco IOS® software-based. UA Catalyst 3850 switch provides uniform wired and wireless policies. It can house 50 access points (802.11n) and support 2000 clients per stack.
Hello All, I have a question regarding a Cisco Aironet Wifi infra with co-existence of another Wi-Fi infra. (different brand e.g. Aurba or Meraki) Cisco Aironet Wi-Fi infra will have one SSID, while another Wi-Fi infra running another SSID. ...
Hello, I want to migrate WLC to Mobility Express. My WLC is in version 22.214.171.124 and the same the CAPWAP AP'sI have one AP 3800 with Mobility Express 8.5.140, it's configured as the Mobility Express Primary controllerI disconnect the CAPWAP AP's from...
Fellow colleagues,Where can I find guidance on how to properly configure a single, dual-radio, AP so that the 5GHz is serving clients full time while the XOR radio acts as a full-time sensor? We are using a 3504 WLC and our APs are 2802i. If there is any ...
Dear All I have a case below: I have an ISE node. EAP certificate is expired so I renewal it and received the certificate from Zone which is using normal for other sites ( Europe, India, America..) But in Vietnam, we met the issue as the picture...
Hello everyone, I have a problem I need to solve with my WLC MAc filtering. I found ton of topics on how to block mac addresses on certain SSID on WLC however I didn't find even one that properly explains how to allow only few mac addresses to connec...