Does CiscoWorks WLSE support 1300 and 1400 Cisco Aironet wireless bridges?
CiscoWorks Wireless LAN Solution Engine (WLSE) provides network management support, including configuration, monitoring, and reporting for the Cisco Aironet 1400 Wireless Bridge and Cisco Aironet 1300 Access Point (AP)/Bridge in wireless bridge mode. CiscoWorks WLSE provides Cisco Integrated Wireless support for the Cisco Aironet 1300 when it is configured in AP mode.
The CiscoWorks Wireless LAN Solution Engine (WLSE) is available as a management tool for Cisco Aironet access points operating autonomously (without a Wireless LAN Controller) and wireless bridges. CiscoWorks WLSE is a turnkey, scalable, and centralized management platform with an HTML-based interface. It uses Simple Network Management Protocol (SNMP) and Secure Shell (SSH)/Secure Sockets Layer (SSL) for managing Cisco Aironet access points and wireless bridges via a Web browser.
Q. Which Cisco Aironet access points operating autonomously are supported by CiscoWorks WLSE?
A. CiscoWorks WLSE supports Cisco Aironet 1240 AG, 1230 AG, 1200, 1130 AG, 1100, and 350 series access points. It also supports the Cisco Aironet 1300 Series outdoor access point bridge.
Q. Does CiscoWorks WLSE support Cisco Aironet wireless bridges?
A. Yes. CiscoWorks WLSE provides network management support, including configuration, monitoring, and reporting for the
Cisco Aironet 1400 Series wireless bridge and Cisco Aironet 1300 Series outdoor access point/bridge in wireless bridge mode.
CiscoWorks WLSE provides support for the Cisco Aironet 1300 Series when it is configured in access-point mode.
Q. How is the Cisco Aironet 1300 Series managed?
A. The Cisco Aironet 1300 Series can be managed though a command-line interface (CLI) or Web-based GUI. In autonomous mode, the Cisco Aironet 1300 Series can also be managed by the CiscoWorks Wireless LAN Solution Engine (WLSE) for bulk firmware updates or mass configuration.
As part of the Cisco Unified Wireless Network, operating in Lightweight Access Point Protocol (LWAPP) mode, the Cisco Aironet 1300 Series can be managed by Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS). The wireless LAN controller provides a network-level view of the wireless LAN, enabling centralized management of devices and policies, providing automatic and dynamic configuration of RF parameters, and enabling advanced services such seamless Layer 2 and Layer 3 mobility, quality of service (QoS), RF firewalling, and location tracking. The Cisco Wireless Control System centralizes many important functions for wireless LAN planning and design, RF management, location tracking, the Cisco Intrusion Prevention System (IPS), and wireless LAN systems configuration, monitoring, and management.
Release notes / product overview / data sheet / FAQ
Hi, I'm learning for CCNA exam on real hardware so i just started playing with WLC. I have encountered general problem which doesn't let me go forward. Maybe problem is actually i have this what i have so i have to work on this what i have But to the poin...
Hello, Based on the formula below, dBm 19.979 should be 99.51mW, but a window box in Ekahau shows it is 25mW. Please see the screenshot below. Are there any one who can tell what the issue is? Thank you P(mW) = 1mW ⋅ 10^(P(dBm)/...
Hello,I want to know if it is possible to provide power to a Mesh AP with a power injector like AIR-PWRINJ6, without connecting this to a switch port !Because it is easier to use a Power injector than a Power adaptator is case there is no power outlet nea...
Hello,One of the devices (android phone) on the corporate WLAN is unable to connect.No issues with apple device on the same WLAN and same AP.Message on the phone: time limit reachedDebug message on wlc at the time of connection:debug di*osapiBsnTimer...
Hello Experts, I am using cisco mobility express AP"2802" as WLC. Created a Guest wlan with custom webpage and authentication using radius server. I can see that Clinet is getting authenticating in ise but client is getting error "The User ...