Step 3 Send the CSR file to a Certificate Authority (CA) of your choice.
Note Once you have generated and sent the CSR file for certification, do not use the genkey command again to generate a new key on the same Prime Infrastructure server. If you do, importing the signed certificate file will result in mismatches between keys in the file and on the server.
Step 4 You will receive a signed certificate file with the same filename, but with the file extension CER, from the CA. Before continuing, ensure:
There is only one CER file. In some cases, you may receive chain certificates as individual files. If so, concatenate these files into a single CER file. Any blank lines in the CER file are removed. Step 5 At the command line, copy the CER file to the backup repository. For example:
Step 7 Restart the Prime Infrastructure server by issuing the following commands in this order:
- ncs stop
- ncs start
Step 8 If the Certificate Authority who signed the certificate is not already a trusted CA: Instruct users to add the certificate to their browser trust store when accessing the Prime Infrastructure login page.
Importing a Certificate Authority (CA) Certificate and Key
Step 1 At the command line, log in using the administrator ID and password and enter the following command:
aliasname is a short name given for this CA certificate. ca-cert-filename is the CA certificate file name. repositoryname is the repository name configured in Prime Infrastructure where the ca-cert-filename is hosted. Step 2 To import an RSA key and signed certificate to Prime Infrastructure, enter the following command in admin mode:
key-filename is the RSA private key file name. cert-filename is the certificate file name. repositoryname is the repository name configured in Prime Infrastructure where the key-file and cert-file are hosted. Step 3 Restart the Prime Infrastructure server by issuing the following commands in this order:
Copy the mycert file to the CA and get the CA back. Copy all certificates together for a chain which needs to be imported in the following order:
*Intermediate CA cert *
*Root CA cert *
Additional we need the p7b file from the CA which contains the chain.
ncs key importcacert mycert.cer mycert.cer reporitory myrepo
The restart is necessary before we import the p7b file. Otherwise we might get an
Import p7b file
ncs key importsignedcert mycert.p7b repository myrep
- AP1 Model : WAP581-A-K9 V01 Serial Number: DNI2141A05W Firmware Version (Active Image): V18.104.22.168- AP2 Model : WAP581-A-K9 V01 Serial Number: DNI2141A04Z Firmware Version (Active Image): V22.214.171.124- AP3 Model : WAP581-A-K9 V01 Serial Number: DNI214...
Hi All,Need help in understanding RRM for 80 MHZ. We have channel width 80 MHz and because of this , we found channel overlapping. We set channel interval time with 10 minutes (default) and DCA set as automatic. But we are not seeing channel change h...
Greetings,I have outdated AIR-BR1310 with broken configuration. This is not about fixing it, but mostly about understanding why it works like it works. BR1310 is connected via trunk interface. Native VLAN have nothing, VLAN 26 is for wireless and VLA...
I just got my hands of an Cisco Aironet LAP1142N-E-K9 and want to convert it from Lightweight to Autonomous. For that I need the imagefile "c1140-k9w7-tar.153-3.JD17.tar" I cant download it from here, nor find it elsewhere. So how do I get the imagef...
This should be a question with an obvious answer but the Google Gods haven't been clear. I'm trying to determine which image I need for a 3702i access poing with the master controller AP (mobility express) running 8.8.125 but can't seem to find anything o...