Step 3 Send the CSR file to a Certificate Authority (CA) of your choice.
Note Once you have generated and sent the CSR file for certification, do not use the genkey command again to generate a new key on the same Prime Infrastructure server. If you do, importing the signed certificate file will result in mismatches between keys in the file and on the server.
Step 4 You will receive a signed certificate file with the same filename, but with the file extension CER, from the CA. Before continuing, ensure:
There is only one CER file. In some cases, you may receive chain certificates as individual files. If so, concatenate these files into a single CER file. Any blank lines in the CER file are removed. Step 5 At the command line, copy the CER file to the backup repository. For example:
Step 7 Restart the Prime Infrastructure server by issuing the following commands in this order:
- ncs stop
- ncs start
Step 8 If the Certificate Authority who signed the certificate is not already a trusted CA: Instruct users to add the certificate to their browser trust store when accessing the Prime Infrastructure login page.
Importing a Certificate Authority (CA) Certificate and Key
Step 1 At the command line, log in using the administrator ID and password and enter the following command:
aliasname is a short name given for this CA certificate. ca-cert-filename is the CA certificate file name. repositoryname is the repository name configured in Prime Infrastructure where the ca-cert-filename is hosted. Step 2 To import an RSA key and signed certificate to Prime Infrastructure, enter the following command in admin mode:
key-filename is the RSA private key file name. cert-filename is the certificate file name. repositoryname is the repository name configured in Prime Infrastructure where the key-file and cert-file are hosted. Step 3 Restart the Prime Infrastructure server by issuing the following commands in this order:
Copy the mycert file to the CA and get the CA back. Copy all certificates together for a chain which needs to be imported in the following order:
*Intermediate CA cert *
*Root CA cert *
Additional we need the p7b file from the CA which contains the chain.
ncs key importcacert mycert.cer mycert.cer reporitory myrepo
The restart is necessary before we import the p7b file. Otherwise we might get an
Import p7b file
ncs key importsignedcert mycert.p7b repository myrep
Hi, We recently purchased brand new 10 units of Cisco 9115AXP and 1 unit of Cisco 3504 Wireless controller.The issue is, some of the Apple laptop (both MacBook Air and Macbook Pro) users couldn't see the SSID and if they see and connect, the connecti...
We are migrating a site from 5508 WLCs with 3502 APs towards a 9800 WLC with 9120 APs. To support a rip and replace scenario we loaded the 5508 with the 8.5MR5ircm image so roaming between the old and new network would be possible. DHCP has been setup wit...
We are running 18.104.22.168 on a Cisco WLC 2504. Wired clients are using SLAAC by using router advertisement packets to give themselves IPv6 addresses, and IPv6 works. IPv6 on the WLAN doesn't work for some reason. This document talks about setting...
I am wondering how one of these NIM's should work if you plug a non MIMO compliant antenna into the diversity input. Will it use both antenna connections or will it only use one?I have a situation where i have two antenna (in a Cisco 4G-LTE-ANTM-O-3-B) wi...
Does anyone know when or if a Prime 3.7 maintenance release will be out? I'm wanting to be able to add our 9800 WLCs running 16.12s, but have been burned by running bleeding edge Prime releases without maintenance packs. -Kevin