Step 3 Send the CSR file to a Certificate Authority (CA) of your choice.
Note Once you have generated and sent the CSR file for certification, do not use the genkey command again to generate a new key on the same Prime Infrastructure server. If you do, importing the signed certificate file will result in mismatches between keys in the file and on the server.
Step 4 You will receive a signed certificate file with the same filename, but with the file extension CER, from the CA. Before continuing, ensure:
There is only one CER file. In some cases, you may receive chain certificates as individual files. If so, concatenate these files into a single CER file. Any blank lines in the CER file are removed. Step 5 At the command line, copy the CER file to the backup repository. For example:
Step 7 Restart the Prime Infrastructure server by issuing the following commands in this order:
- ncs stop
- ncs start
Step 8 If the Certificate Authority who signed the certificate is not already a trusted CA: Instruct users to add the certificate to their browser trust store when accessing the Prime Infrastructure login page.
Importing a Certificate Authority (CA) Certificate and Key
Step 1 At the command line, log in using the administrator ID and password and enter the following command:
aliasname is a short name given for this CA certificate. ca-cert-filename is the CA certificate file name. repositoryname is the repository name configured in Prime Infrastructure where the ca-cert-filename is hosted. Step 2 To import an RSA key and signed certificate to Prime Infrastructure, enter the following command in admin mode:
key-filename is the RSA private key file name. cert-filename is the certificate file name. repositoryname is the repository name configured in Prime Infrastructure where the key-file and cert-file are hosted. Step 3 Restart the Prime Infrastructure server by issuing the following commands in this order:
Copy the mycert file to the CA and get the CA back. Copy all certificates together for a chain which needs to be imported in the following order:
*Intermediate CA cert *
*Root CA cert *
Additional we need the p7b file from the CA which contains the chain.
ncs key importcacert mycert.cer mycert.cer reporitory myrepo
The restart is necessary before we import the p7b file. Otherwise we might get an
Import p7b file
ncs key importsignedcert mycert.p7b repository myrep
Hi all,It is my guess that one can the Service Port IP address.. when ever, without causing/needing a reboot.. Yes or No?I have a standalone LAB unit that I changed the SP ip on and the GUI (on mgnt ip) dropped out.. unit still pinged..W...
We have a Cisco 3504 WLC anchor controller that provides anchoring to several remote foreign controllers for certain WLAN's. This anchor is a single point of failure, and we are looking at options for providing redundancy in the event of a controlle...
Hello everybody, I have some questions about Band Select, MAC address randomization and Probe Request/Response. Please, feel free to contribute and add your own questions to this discussion. 1) How is Band Select feature impacted by MAC add...
We recently purchased AP2802E-B-K9, I am trying to perform initial configuration but not able to login configuration through GUI, I am complete new with this model access if someone will help will be appreciated. Attached the screenshot What I did are the...
Hi Folks, There is a client Macbook Pro 15 inch 2019 drops wifi connection frequently for 5sec, 10sec, and so on but not more than 20 sec. I found the below details on WLC 2504 (Software Version 126.96.36.199) corresponding to the client. It seems to be ...