When world mode is enabled, the Cisco Access Point (AP) adds channel carrier set information to its beacon. Client devices with world mode enabled receive the carrier set information and adjust their settings automatically. For example, a client device used primarily in Japan can rely on world mode to adjust its channel and power settings automatically when that device travels to Italy and joins a network there. World mode is disabled by default.
Note: The channels are hard-coded on AP chips. The world mode does not change the number of channels that are supported in a country. For example, in the U.S., channel 14 cannot be used even if world mode is configured.
I have Wireless network with AIR-AP1832 APs and CT-3504 controller (OS Ver.: 18.104.22.168). All is working fine except iPhone 12 Pro Max with iOS 14.5.1, which disconnects from network frequently.Can anyone help in this regard? WLC Config is attached
Hello Guys, I'm the process of ordering new Wireless Controllers and got confused about how the AP license on the WLC 5520 works. The part number is AIR-CT5520-K9, with only this part number, can I have a certain number of AP already licensed?Or...
Hi we have AP3702 and vWLC ver 8.10. We only can see 5G signal, but cannot see 2.4G. The Radio policy is set as ALLI notice at the AP, operation status is DOWN. please see the below picture. Why it is DOWN? Thanks
Привет, кто нибудь тестил Fast Transition на WLC, Over the DC или Over the AIR, что лучше использовать на площадке с контроллером? в режиме Flex connect понятно что Over the AIR с высокой задержкой до контроллера
Hello, I am trying to resolve a problem with a new network. I have a 240ac access point operating normally. But when I have tried to add a 142acm mesh extender using the app even after zero day setup in keeps cycling through led colors after spending...