cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

How to Configure HWIC-AP with a Wireless Compatible Router

5072
Views
0
Helpful
0
Comments

     

     

    Introduction

    How to Configure HWIC-AP with a Wireless Compatible Router.

    Cisco HWIC Access Point Interface Card

     

    Converged IP Communications with Wireless IP Phones

    Resolution

    The Cisco (High-speed WAN interface cards) HWIC-AP 802.11G and HWIC-AP 802.11A/B/G are Wireless LAN interface cards in the High-Speed WAN Interface Card (HWIC) form factor. These cards provide integrated Cisco Access Point (AP) functionality in the Cisco 1800 (Modular), Cisco 2800, and Cisco 3800 Integrated Services Routers.

    The HWIC-AP runs Cisco IOS  Software, and provides high-speed connections between individual laptops, desktops, and servers. The features of HWIC-AP include:

    • Virtual LAN (VLAN) support  
    • Enhanced wireless security
    • Comprehensive wireless management capabilities

    Single-Mode Access Point HWIC Front Panel

     

    1

    Mounting screws

    3

    OK LED for the 802.11b/g radio

    2

    RP-TNC connectors

    4

    DATA LED for the radio

     

    Dual-Mode Access Point HWIC Front Panel

     

    1

    Mounting screws

    4

    OK LED for the 802.11b/g radio

    2

    RP-TNC connectors

    5

    DATA LED for the 802.11a radio

    3

    OK LED for the 802.11a radio

    6

    DATA LED for the 802.11b/g radio

     

    Problem Type

    Configure / Configuration issues

    Products

    • Access point
    • Wireless Integrated Services Routers (Wireless ISR)

    Reference

    CreatePlease to create content
    Content for Community-Ad

    Cisco COVID-19 Survey