How to configure SSL and HTTPS access to the Wireless LAN Solution Engine (WLSE) so that only some IP addresses can access the WLSE

[TCC_2]

Resolution

At present, there is no way to configure IP filters on the WLSE. However, one can authenticate users using a local authentication module or using an external server to do RADIUS or TACACS+ authentication. Once you have selected and configured a module, all authentication transactions are performed by the authentication service associated with that module. Users log in with the user ID and password associated with the current authentication module. Note that you must create all user roles on the local authentication module.

Refer to these documents for more information:

• For more information WLSE and WLSE Express, refer to Getting Started.
  
  
• For more information on security, refer to the Managing Security section of Managing the Appliance.
  
  
• For more information, refer to Configuring the CiscoWorks Wireless LAN Solution Engine TACACS+/RADIUS Authentication Using Cisco Secure ACS.