Special attention should be paid to the use of strong passwords. Cisco LEAP is a password-based algorithm. To minimize the possibility of a successful dictionary attack, use strong passwords, which are difficult to guess. Some characteristics of strong passwords include the following:
A minimum of ten characters.
A mixture of uppercase and lowercase letters.
At least one numeric character or one non-alphanumeric character (example: !#@$%).
No form of the user's name or user ID.
A word that is not found in the dictionary (domestic or foreign).
Configure / Configuration issues
WLAN adapters (wireless card) / ACU (Aironet Client Utility)
Hi all,I have several outdoor AP delivered in a MESH mode. I am not going to build a MESH network I only want to onboard the AP and convert it to a local mode. So I don't want to configure MESH AP join profile and site tag.It was easy in the AireOS. I onl...
Hi,I have a Flex Connect design on a new 9800 WLC.I would like to know if I can have a different VLAN ID per SSID like the AireOS FlexConnect Group - WLAN VLAN mapping. In my design the Flex Profile is equal to a Branch Office. So I would like t...
Hello, We've installed virtual WLC using AIR_CTVM-K9_8_10_151_0.ova file. The installation and basic configuration of the WLC is done successfully.We'd like to add a lightweight AP 2700 to the vWLC but the AP stuck in downloading state.&nbs...
Hi community,I've been receiving many complaints from users that were unable to connect to the corporate WLAN with PEAP-TLS (but also on BYOD SSID with PEAP).After investigating I found all those sites where with AP3702. Digging into debugs, I've checked ...
Hi forum, Do you have experience in implementing EWC-AP (91xx series with 17.5.x IOS-XE) as Master AP in a network with AP2802 (Aire-OS 8.3.150) as subordinates? Or with similar versions of OS. I experience that the AP2802 fails during image up...