cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

How to know if external antenna's are attached to AP ?

2656
Views
0
Helpful
3
Comments

Hello,

I have multiple AP-1242  ( in autonomous Mode) to manage on remote location ( more than One thousand ) . All of them have 2.4 Ghz Antenna 4941. Some of them have antenna 5135 ( Ghz) . Is the a way  ( except a visual inspection)  to  know if 5135 antenna's are connected to  an  AP with a show command ?

I  did not find anything on the net  about that.

Thanks a lot for you tips

Regards

Frédéric

Comments
Leo Laohoo
VIP Community Legend

No.

muratg7777
Beginner

Antennas are passive devices so you can not see which one is connected

But;

5135 use dot11radio1 interface. Check the interface is configured or not.

f-vanryckeghem
Beginner

Indeed that  was my  fear  ...  but in  fact  radio  interface is  not configured because antenna's were placed "for future use" ... so only the visual inspection  may  help me  great :-(

thank  for your post ... you have confirmed what I  though

Regards

Frédéric

Create
Recognize Your Peers
Content for Community-Ad