Trying to locate the lastest version of firmware, drivers, and utilities for Aironet devices.
To locate the latest firmware go to the Wireless LAN Cisco Downloads. Once there you will be able to locate your platform and locate the latest version of firmware, drivers, or utilities by looking at the numbering sequence.
Note: The Wireless Software Selector does NOT contain 350, 1300 and 1400 Wireless Bridge Software. This software can only be accessed if you have a Cisco.com login with a service agreement. The software is located in Option 2 Display Tables or in the Cisco IOS Upgrade Planner. If you are not a registered user, please go to Cisco.com registration.
WLAN adapters (wireless card) / ACU (Aironet Client Utility)
Hi All,I'm trying to setup Cisco 9800-CL (in VMWare) as primary (Foreign controller) and Anchor (In DMZ). I have completed the primary controller configuration and got the WAPs joined and working as expected for Flex-connect (locally switches vlans), but ...
I have the need to extend my wireless signal outside for about 100ft until a mesh wireless is install. I still have lightweight 3502i installed, can i reconfigure another LW3502i as a repeater have to rooted to the closest AP to extended just one SS...
I have a question on the reset of the Cisco Wireless Controller via the GUI interface. Will this only reconfigure the Wireless controller and leave the rest of the switch configuration in place? For some odd reason when changing this from a Mobility Contr...
Hey Folks, What will happen when two nos. of AP's (IW6300's) are placed side by side, may be 5 meters far from each other as Root access points communicating with other MAP's in the vicinity.In short, can those RAP's act as redundant access points to...
I'm using an AIR-AP-1142N-A-K9 in a home environment, and trying to optimize throughput. Internet connectivity is an "up to 600mbps" cable Internet service from Comcast, using their Technicolor CGM4140COM "xFi Gateway", in bridge mode, connected to a...