AP 1200 reboots or resets when running with version 12.2.15XR1. The reboots are not predictable in any manner of rebooting. The AP reboot requires two to four hours. The radios that run in the unit are the 802.11a and the 802.11g.
In the scenario of Cisco bug ID CSCee49659, if a user authenticates at the same time the Command Line Interface (CLI) is used to change the hostname, a reboot can occurred.
There is not enough information to determine why or when this occurs. There are no bugs reported where changing the hostname causes a crash.
AP1200 reboots/reset w
AP1200 will reboot or reset when running with the 12.2.15XR1 release. The reboots are not predictable or in any manner of rebooting. The AP are rebooting between 2 to 4 hours time. The radios that are running in the unit are the 802.11a and the 802.11g
I have three AERONET Aeronet AIR 1832I-E-K9 Wireless AP connected to Catalyst 9200 Switch I dont have any wieless controller. I need to configure them I have assigned them IP using "Capwap ap ip netmask"How can I make them work as an AP and I w...
Using 2x 1562's in this exact setup for bridging. I get to the part for whitelisting the MAC address (done), and enabling bridging (done) but the MAP never joins the RAP, with this error in the CLI: CRIT-MeshAwppAdj: Blacklisting Adjacency due to ...
Hi, Why wlc c9800 is still using version 16.12 though it own version 17.5? Please see the below output. Dont know why boot-start is not working. But another same model wlc is using 17.5 and not using boot-start wlc2#sh run | i bootboot-start-mar...