This is a heads up about the following bug on Location Appliance Code pre 220.127.116.11: CSCth48443
If you are doing location tracking with a 2710 and you upgrade your WLC from 6.0.x to 7.0.x release, you will notice that there is no 7.0 code for the 2710. After the WLC code upgrade, tracking for wireless clients will stop.
The issue is fixed via bug CSCth48443 in code 18.104.22.168 or later on the 2710.
While waiting for 22.214.171.124 or later to be released on Cisco.com download section, a TAC case needs to be opened to get the special fixed code on the 2710.
We have a great room and fourier at a commercial facility, where the electricians pulled wire for Cisco Access points.The facility is an "alpine" looking structure. On the inside one room is 40ft L x 30 ft wide approx. room has a ceiling that at the ...
Hello team, Im new in the wireless world and I'm reading docs about the controller Catalyst 9800-CL and I'm facing some doubts, we can see 3 interfaces in the manual, they are:1- Device Management interface;2- Wireless Management interface;3- High Av...
I have 1800S Sensor Image Version 126.96.36.199 provisioned with wired backhaul to DNAC version 188.8.131.52When sensor is connected on subnet with DHCP Option 43 for the DNAC, I'm able to login to console and SSH with the SSH password configured in DNAC.When ...