download TFTPd32 from Google and install it on ur PC.. point the image that you have downloaded in the TFTP server..
connect a Ethernet cable between ur laptop and AP.. both should be in the same subnet.. and connect a console cable and get the hyperterminal console access and issue the command.. make sure you are able to ping the PC and the AP and vice versa!!
AP#debug lwapp console cli or debug capwap console cli
AP(confg)int fa 0
AP(confg-if)ip addr <addr> <mask> (same subnet as that of the laptop)
AP#archive download-sw /force-reload /overwrite tftp://<tftp ip address>/<image name.tar>
I have a 3702I (AIR-CAP3702I-A-K9) that suddenly stopped talking via its Ethernet port. It was in production for about 3 years with no problems. It will boot if I attach it to a power injector, but the switch port connected to the injector nev...
I suspect that some users are consuming most of the bandwidth on some of my AP(s) and causing diminished throughput for my other users. What is the best way to find these users and track their activity? Is there a way to do this from the Wi-LA...
Most of the times while considering for wireless controllers, we look at what are the options available for deployment – physical appliance for my large campus or virtual appliance deployed on private/public cloud? Or a wireless controller embedded on a s...
Hello.. One of my Cisco 1832i can't joing existing Mobility express installed on other 1832i, meanwhile the other AP can join perfectly. Here is the log :[*07/15/2019 14:36:42.1231] CAPWAP State: Discovery[*07/15/2019 14:36:42.1331] Discovery Re...