download TFTPd32 from Google and install it on ur PC.. point the image that you have downloaded in the TFTP server..
connect a Ethernet cable between ur laptop and AP.. both should be in the same subnet.. and connect a console cable and get the hyperterminal console access and issue the command.. make sure you are able to ping the PC and the AP and vice versa!!
AP#debug lwapp console cli or debug capwap console cli
AP(confg)int fa 0
AP(confg-if)ip addr <addr> <mask> (same subnet as that of the laptop)
AP#archive download-sw /force-reload /overwrite tftp://<tftp ip address>/<image name.tar>
I'm having trouble getting an L2 ACL to work on the Cat9800 on XE 16.11.1cI have a WLAN policy profile called nm-test-policy with a specific layer2/datalink acl defined in the running config: wireless profile policy nm-test-policyaaa-overrideautoqos ...
Hi All I have been working on existing WLC 2500 with a single individual interface with a handful wlan Ids.The interface is the management 192.168.120.0/25 192.168.121.10 the management interfaceI wanted to create an additional ID that would be dishi...
Hello All. i have 3 AP's cisco aironet 1815i (A, B, C) A is the controller.A and B working perfectly i can get an ip from dhcp and i can access my Network and the internet either,but the problem is with C i can access it with SSH connection and...
Hi all, I managed to block specific machines from connecting to my ssid by blocking their mac addresses on my 3504 WLC via "security->AAA->Disabld CLients->Manual Disable" I also manage to verify the logs via CLI using "client debug mac...