After loading the Peripheral Component Interconnect (PCI) drivers for the client adapter, the PC freezes up. This is caused by an Interrupt Request (IRQ) conflict.
Uninstall the PCI cards and put the client adapter in first or install the card in a different slot. If the PC freezes/hangs when Windows 98/2000/ME starts and is not able to boot in safe mode, this indicates that Windows is trying to place all PCI devices on the same IRQ.
Note: Try upgrading the wireless card driver and also PCI controller driver [for desktop computer]. Also remove the files netx500.inf and netx500.pnf & oemX.inf and oemX.pnf before reinstalling.
hi i have a probleme i see my ap join my controller but disapear after 10 sec mabye AP6c41.6ab1.f28f#*Jul 13 20:42:03.239: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.0.222*Jul 13 20:42:03.239: %DTLS-5-ALERT: Received WARNING : Close notify a...
Hello Experts, Do we have the means to determine the radio slot the AP uses to send the deauth frames while containing the rogue APs / rogue clients?Since for containment, the AP will be using the spoofed mac address of the attacker, the wireless PCA...
Hello guys, I have 2 cisco AIR-AP1142N-E-K9 devices and I have reset them, I'm trying to configured but its a bit challenging.Is there anyone who can help me out, on how to reconfigure the AP. Thank you