Problems with the radio signal can occasionally be traced to the firmware on the communicating devices.If a radio communication problem is encountered with your Wireless LAN (WLAN), ensure that each component is running the latest revision of its firmware or driver with your Cisco Aironet WLAN products. You can obtain updated drivers and firmware from Cisco Downloads.
The signal is weak or fluctuating
WLAN adapters (wireless card) / ACU (Aironet Client Utility)
It’s been a long road for our AireOS wireless controllers. In fact these products have been around Cisco in some form since 2005. As you may have heard, Cisco made the decision to End-of-Sale (EOS) these products last month.
That means that these AireOS ...
Hello everyone, I just got a monitor AIR-AP1800S-Z-K9 and it has no ethernet port, only USB. Wrondering if it is possible to deploy it using some kind of deployment SSID, just like Mobility Express does or if I´ll need to buy and Ethernet...
Hello If APs are deployed with only a primary controller assigned. By default, which mobility group member controller do the orphaned APs join in the event of a failed controller. There are multiple WLC in HA configuration in a mobil...
Hi expert I convert my Cat 9120 AP to EWC.Then I try to provision it using iPad by Over-the-Air Provisioning (OTAP).But the configured SSID doesn't appear in my laptop, iPad, smartphone. But in CLI, I can see the SSID already up.Does anyone...