Some versions of firmware actually change the readings. Inside the card an analog-to-digital conversion takes place. The analog reading that the card gets and reports to the Aironet Client Utility (ACU) does not always use the same calibration that was used in some of the earlier versions of firmware. For more information on this, refer to the Cisco Aironet Driver and Firmware Frequently Asked Questions.
The signal quality varies on machine the same distance away
WLAN adapters (wireless card) / ACU (Aironet Client Utility)
AP 1852 does not join vWLC virtual controllers I installed 2 new virtual controllers vWLC version 8.5.161. and configured the mobility group, activated Ap Fallback among othersetc.I'm trying to upload an AP model 1852 AIR-AP1852I-Z-K9 that is in vers...
hallo.Ich suche eine Möglichkeit mehrere Access Points gleichzeitig zu konfigurieren da ich für ein Projekt knapp 3000 AP konfigurieren muss die fast alle die selben einstellungen erhalten sollen.Es gibt von Zyxel ein Tool welches so etwas für deren AP er...
Dear Team, how to bind user device particular mac address in rfs7000 (ap 621 and ap6522) (need to connect only mac binded users, other users need to deny the connectivity ) please help. thanks in advance. in
Hi all,we have have deployed Meraki mx firewall,switch and Meraki mr20 and mr33.we are unable to view location analytics..below is the error we get.(Analytics data cannot be displayed for this network. Data is only available for wireless networks with the...