hi,guys
I got two Lap1524 and the WLC is 5508, the problem is lap can join to the WLC successfully, but the radio interface of the lap is down. why's that?
The attachments are something about lap1524.
The following is the output of "debug capwap errors enable" on WLC
(Cisco Controller) >*Dec 04 06:36:56.675: 88:75:56:98:ed:00 LWAPP message validation failed for Unknown Payload(110) in message of len=246 from AP 88:75:56:98:ed:00
*Dec 04 06:36:56.676: 88:75:56:98:ed:00 Failed to validate vendor specific message element
*Dec 04 06:37:09.496: 88:75:56:98:e5:00 LWAPP message validation failed for Unknown Payload(110) in message of len=246 from AP 88:75:56:98:e5:00
*Dec 04 06:37:09.497: 88:75:56:98:e5:00 Failed to validate vendor specific message element
Thanks.