The maximum number of Lightweight APs supported on the WLC
Limitations on the number of supported Cisco Access Points (APs) are based on the hardware used. The 4402 Wireless LAN Controller (WLC) with two gigabit Ethernet ports comes in configurations that support 12, 25, and 50 APs.
The limitation on the number of supported access points is based on the hardware that you have. The 4402 WLC with two gigabit Ethernet ports comes in configurations that support 12, 25, and 50 Light Weight Access Points (LAPs). The 4404 WLC with four gigabit Ethernet ports supports 100 LAPs.
The 4400 Series wireless LAN controller supports up to 625 rogues, which includes acknowledged rogues, while the 2100 Series supports 125 rogues.
5500 Series Wireless Controller for up to 500 Cisco access points
Cisco Flex 7500 Series Cloud Controller Supports 300, 500, 1000, 2000, 3000 and 6000 access points
Cisco 8500 Series Controller Supports 300, 500, 1000, 3000, and 6000 access points
The 4404 WLC with four gigabit Ethernet ports supports 100 APs.
The Cisco 2000 Series WLC supports up to six Lightweight APs, and the 4100 Series WLC supports up to 36 APs.
I’ve got one of these and I would like to access it via a gui, what’s the simplest way to do, at the moment all I can see is the vlan IP address and all the other ports are unassigned when I do a sh ip int brief. What’s the easiest way to ...
Having a hard time finding the correct documentation/answer to add another VLAN to an Aironet Wireless bridge. I just inherited this setup & still coming up to speed. Have 3 existing Cisco AIRBR 1410 & I need to add another VLAN to...
all, Cisco 9800 controller supports wave 2 APs such as 2800 and wifi 6 such as 9100. This is just the ap models supported but my guess is they can still run in 802.11b or a to support old handheld devices right despite aps being wave 2 or ...
Hi all, if you buy 9117 APs which are wifi 6 , would it support 802.11b and a / very old standards on its own ? if yes, would every one need to switch to old standard if one device is say 802.11b Remember back in the days, if you had ...