Wireless - Mobility Knowledge Base

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Knowledge Base Articles

IntroductionCore IssueResolutionProblem TypeProductsReference  Introduction When an attempt is made to configure the WGB and the AP for EAP-FAST, the "DOT1X_SHIM: Start supplicant on Dot11Radio0" , "dot1x-ev:Dot1x Packets are not expected Interface 0...

TCC_2 by Level 10
  • 2479 Views
  • 0 comments
  • 5 Helpful votes

Core IssueIf you have done any date changes in the CiscoWorks Wireless LAN Solution Engine (WLSE) appliance, that can cause the jobs to get older by 180 days.ResolutionWLSE has a background process to delete configuration and firmware jobs, which are...

TCC_2 by Level 10
  • 916 Views
  • 0 comments
  • 0 Helpful votes

Core IssueThe error message appears if there is a  mismatch in the shared-key between the RADIUS server and the Cisco  Aironet Access point.ResolutionEnsure that the shared-key used on the RADIUS server and the AP are the same.Such problem can occur ...

TCC_2 by Level 10
  • 4756 Views
  • 0 comments
  • 0 Helpful votes

ResolutionThis issue occurs when Wireless Domain Services (WDS) AP  and the infrastructure access point (AP) are on different subnets. When an AP runs as the WDS, it does not support infrastructure devices on different subnets. The WDS can only run o...

TCC_2 by Level 10
  • 3918 Views
  • 0 comments
  • 0 Helpful votes

IntroductionScenarioResolutionProblem TypeProductsReference  Introduction The firmware image became corrupted when there was an attempt to upgrade the firmware from the GUI. Scenario These error messages during the firmware upgrade process display: C...

TCC_2 by Level 10
  • 2046 Views
  • 0 comments
  • 0 Helpful votes

Core IssueIn this sample configuration, when one Demilitarized Zone (DMZ) controller fails, the wireless LAN (WLAN) client does not automatically connect to a second DMZ controller:The Mobility Anchors are used in order to provide WLAN access for gue...

TCC_2 by Level 10
  • 1592 Views
  • 0 comments
  • 0 Helpful votes

Core IssueThe patch for the Wireless LAN Solution Engine (WLSE) 2.11 is not applied before the upgrade of the WLSE, which leads to database corruption.ResolutionIn order to resolve this issue, first take a backup of the database then apply the WLSE 2...

TCC_2 by Level 10
  • 996 Views
  • 0 comments
  • 0 Helpful votes

Core IssueIntel Pro 2200BG client adaptor runs into Blue Screen on Desktop (BSOD) when associated to Access Point (AP) 1200 running firmware version 12.3(8)JA, but only if  the dot11 phone command is issued.ResolutionTo resolve the BSOD issue, perfor...

TCC_2 by Level 10
  • 1122 Views
  • 0 comments
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Top Contributors