Understanding Multicast in Unified Wireless Networks

2077

Views

Helpful

Comments

edited on: ‎11-18-2020 ‎02:59 AM

Comments

Very well explained Jeff!

This was most helpful.

Thank you.

Latest Contents

Apply the AP 803's web setting will occur error 404

Created by Albert_Shih on 02-25-2021 12:08 AM

Hi all,When I "apply" the AP 803's web setting the web page will occur error 404.The version of AP 803 is 15.3(3)JKI have been try to use the Browser:Chrome、Edge、Firefox , and also try the older version of the browserStill doesn't work!!How do I fix ... view more

apple macos device disconnect wifi with 802.1x

Created by willwillwang on 02-24-2021 06:27 PM

wlc 5502 version is 8.5.161.6i have a ssid use by macos device,and disable loadbalance and 802.11rthe ssid use 802.1x authentication with windows 2012r2 nps service(radius)but apple device untimely disconnect,windows device is no problemi open a ssid... view more

Set up a firewall between wireless controller and APs

Created by showipinterface on 02-24-2021 04:15 PM

Hi, I would like to setup a Palo Alto firewall between cisco WLC and APs to control some traffic. Anyone can share some idea for this? or send link in order to know what I need to pay attention to? Thank you very much.

Way to get DFS notices in the WLC log

Created by derek.small on 02-24-2021 03:33 PM

If you are using UNII-2 Ext channels, is there a way to get DFS notices in the WLC log? I thought they showed up there by default, but I just found DFS pauses in the logs on several APs, and there was nothing in the WLC log about it. I've logg... view more

9800 / ISE Hotspot Portal

Created by wizi on 02-24-2021 01:54 PM

I have configured a Hotspot portal and auth policies on ISE. A new client is successfully redirected to the portal and added to the GuestEndpoints group after accepting the policy. However, the client stays in Webauth Pending state on the 9800 WLC.After d... view more

CreatePlease to create content