(1)IDS 'NULL probe resp 1' Signature attack detected on AP '####' protocol '802.11b/g' on Controller '1###'. The Signature description is 'NULL Probe Response - Zero length SSID element', with precedence '2'. The attacker's mac address is '##:##:##:##:##:ff', channel number is '1', and the number of detections is '1'.
IDS 'NULL probe resp 2' Signature attack cleared on AP '###' protocol '802.11b/g' on Controller '###'. The Signature description is 'NULL Probe Response - No SSID element'.
what's the meaning of two alarm?how can i do to reslove it?
Hi all,My WiFi network suffers from constant deauthentications and disassociations. Sometimes I can't reconnect the laptop until I reboot the AP. Tried what was suggested in other thread which helped the guy but it didn't help me, which was disabling n fo...
After adding a WLC to ISE if you get the following error (See message below) after running debug aaa tacacs enable in the WLC. Incorrectly formatted authorization message Here's what you need to do to fix it. Login to ISE Work centers, Settings, Device ad...
Hi All, I tried n numbers of time to upload AP images in WLC 2504 but no help, actually both Primary & Backup images i lost due to an incident happen on the network, to restore and get it fixed i tried to load AP images and tried with different v...