Core Issue
The three indicator lights on top of the Workgroup Bridge (WGB) report Ethernet activity, operational status, and radio activity.
Resolution
The three indicator lights on top of the Workgroup Bridge (WGB) report Ethernet activity, operational status, and radio activity.
- The Ethernet indicator signals traffic on the wired LAN, or Ethernet infrastructure. This indicator blinks green when a packet is received or transmitted over the Ethernet infrastructure.
- The status indicator signals operational status. Blinking green indicates that the bridge is operating normally but is not communicating with an access point. Steady green indicates that the bridge is communicating with an access point.
- The radio indicator blinks green to indicate radio traffic activity. The light is normally off, but it blinks green whenever a packet is received or transmitted over the bridge's radio.
For more information on interprting the state of the indicator LEDs on the WGB, refer to the Checking the Top Panel Indicators section of Cisco Aironet 350 Series Troubleshooting.
Problem Type
LEDs
Products
Workgroup bridges